Raspberry PI PICO + Ethernet on the same board and gives access to all pins which are available on Raspberry PI PICO Board.

Features

• RP2040 microcontroller with 2MByte Flash

  • Dual-core cortex M0+ at up to 133MHz

  • 264kByte multi-bank high performance SRAM

  • External Quad-SPI Flash with eXecute In Place (XIP)

  • High performance full-crossbar bus fabric

  • 30 multi-function General Purpose IO (4 can be used for ADC)

    • 1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V)

  • 12-bit 500ksps Analogue to Digital Converter (ADC)

  • Various digital peripherals

    • 2 × UART, 2 × I2C, 2 × SPI, 16 × PWM channels

    • 1 × Timer with 4 alarms, 1 × Real Time Counter

  • 2 × Programmable IO (PIO) blocks, 8 state machines total

  • Flexible, user-programmable high-speed IO

• Includes W5100S

  • Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE

  • Supports 4 Independent Hardware SOCKETs simultaneously

  • Internal 16 Kbytes Memory for TX/ RX Buffers

  • SPI Interface

• Micro-USB B port for power and data (and for reprogramming the Flash)

• 40 pin 21×51 ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations

• 3-pin ARM Serial Wire Debug (SWD) port

• 10 / 100 Ethernet PHY embedded

• Supports Auto Negotiation

  • Full / Half Duplex

  • 10 / 100 Based

• Built-in RJ45(RB1-125BAG1A)

• Built-in LDO (LM8805SF5-33V)