DC 12V 1CH Universal Wireless Remote Control Switch Receiver Module and RF 433mhz Transmitter remote.
Technical Data:
--------------------------
Input Power: DC10V-14V 12v 1A recommended
Standby Current:<5MA
RF Frequency:315M or 433M
RF working mode: superheterodyne
Receive sensitivity: >97dbm
Transmitting distance:>100m ( open space)
Decoding mode:MCU software decoding
Multi Remote : can be added up to 16 Remotes
Working mode: Momentary, Toggle, Latching Time delay (5s ,10s ,15s )
Output Terminal : NO , NC , COM
Dimension of PCB:35*30*18mm (L,W,H)
+V : 12V + input;
- V: 12V - input;
NO: Output, normal open;
COM:Output, common;
NC: Output, normal close;
Learning the code: (momentary): press key 1 time
------------------------------------------------------------
Push the learning key on the receiver once, initiate momentary mode learning.
Just wait for the LED switches on.
Push the remote button, LED indicator on the receiver board will flash and switch off.
After 3 seconds, learning successfully.
Learning the code: (Toggle): press key 2 times
---------------------------------------------------
Push the learning key on the receiver twice, initiate toggle mode learning.
Just wait for the LED switches on.
Push the remote button, LED indicator on the receiver board will flash and switch off.
After 3 seconds, learning successfully.
Learning the code: (Latching): press key 3 times
-----------------------------------------------------------------
Note: for latching mode, in order to learn more remote controls, you will need two different buttons, first button for "ON", second button for "OFF".
For example: button A = ON, button B = OFF
Push the learning key on the receiver 3 times, initiate latching mode learning.
Just wait for the LED indicator on the receiver board flashes and switches on.
Push the remote button A. LED flashes 5 times.
Push the remote button B.Led flashes 5 times.
After 3 seconds, the LED indicator switches off again, learning successfully.
A = ON , B = OFF.
Learning the code: (Time delay mode)Using the description below to set up the following mode.
Push the learning key on the receiver 4 times, set up for 5 seconds delay.
Push the learning key on the receiver 5 times, set up for 10 seconds delay.
Push the learning key on the receiver 6 times, set up for 15 seconds delay.
The LED indicator switches on.
Push the remote button, LED flashes and switch off.
After 3 seconds, learning successfully.
Receiver Code Resetting/Clearing: press key 8 times
Press learning key on the receiver 8 times, LED indicator on the receiver flashes and switches off. Note that after resetting the receiver, all the paired remote controls will have to be re-paired in order to control the receiver again.
