Features:

● Based on three T5L2 chips, running DGUS II system

● With onboard buzzer, RTC and speaker interface

● 11.6-inch, 1920*1080 pixels, IPS wide viewing angle, 2K HD smart screen

● UART2: ON=TTL/CMOS; OFF=RS232

●Support FSK camera function (The function is not available ex-factory, but the circuit  is reserved. Customization is available if needed.)

●Supports audio and video playback

User interface    8Pin_2.0mm socket for power supply and serial communication Flash             32MBytes (2*16MBytes NOR Flash),                            can be used to store user UI files such as fonts, images, music, etc., with erase/write                                    cycles >100,000 times Expand Flash pads      : Two expansion slots support NOR or NAND Flash, up to 64MB(4x16MB NOR Flash)                                       or 48MB+512MB (3x16MB NOR Flash + 512MB NAND Flash) Buzzer                          :    3V passive buzzer Speaker interface    :    2Pin_2.0mm socket, speaker interface RTC        :    Super-capacitor supplies power to RTC, accuracy: ±20ppm @25℃.                         Can maintain normal operation for 7 days after power-off. Reserved button cell power

                      supply compatible circuit. SD card slot    : For DGUS project file downloads (UI, CFG files, kernel, etc.), 4 Mb/srate Reserved module interface:    Supports DWIN Wi-Fi modules (e.g., Wi-Fi-20) and USB download modules(e.g., HDL702) PGT05 interface :    For programming DGUS firmware, located inside the shield of 2K DGUS module  

Brightness    DMG19108C116_05WTC:200nit

Mode    UART2: ON=TTL/CMOS; OFF=RS232 (Default RS232)

Rated Power    <10W Operating Voltage    12~36V, typical value of 12V Operating Current    400mA    VCC=12V, max backlight    170mA    VCC=12V, backlight off Recommended power supply: 12V 1A DC